Saturday, October 5, 2019
Research in Business and Management Literature review
Research in Business and Management - Literature review Example A woman even in the current epoch needs to go through several organizations hazards in workplace if they really desire to succeed in their professional career. Such unequal treatments practiced in contemporary organizations are highly unethical and immoral. This paper will make a critical analysis of several scholarly articles relating to this matter. It is highly rational to critical analyze this issue because if development process of a firm is not engendered, then it prosperity is endangered in the long run (Leinonen, 2012). Long back it was claimed by of all the wilderness of human unawareness, perhaps the most spendthrift and precious to human development has been the waste of the distinguishing authorities of womanhood after the child-bearing age (Leinonen, 2012). It was also found that that both vertical and horizontal segregations among men and women labour force in organizations exists in favour of men workers and against to the female employees (Poutanen and Kovalainen, 2013). They also stated that in work-family arrangements, in labour markets or while making the choice of professions, gender related inequalities are common characteristic features. In 1989, a special study introduced on American military organization showed that the opportunities offered to women were less than the aggregate opportunities provided to men (Swan, 2010). It was claimed that in most of the workplaces in the contemporary era, gender wage gap is highly persistent workplace negativity in most of the nations (Swan, 2010 ). Women are subjected to several occupational hazards in their professional life. The midlife and older women working in various corporate organizations are subjected high job attrition at times of crisis and problems in the external world (Aghazadeh, 2004). Like the recent global financial crisis have significantly lowered the level of women employments relative to that of men in
Friday, October 4, 2019
Engineering And Construction Parking Demand Assignment
Engineering And Construction Parking Demand - Assignment Example The fulfillment of the desires of the clients is highly recommendable and forms the basis of the primary goal of this designer. A rectangular design enables provision of a well-defined design development will significantly increase the envisaged probability of creating parking areas that gratify this overriding goal. In the process of maximizing the parking zones, critical relevance is placed on the analysis of the presented need, physical requirements need analysis, aesthetics, and safety. From a detailed and comprehensive analysis of the facility or chapel, a transportation plan is highly considered in locating the parking for the vehicles that will be coming inside the compound. The highly detailed and elaborate outline of the parking lot creates an inventory of enhanced parking areas, free spaces, and their employment thus determining the adequacy and effectiveness of present configurations. The parking lot has the ability to amply contain several vehicles collectively for the at tendees of the chapel.The proper shape of parking zone design enables tackling of the poor location and even outlined or inherent deficiencies of chapel or visitors and even reserved parking areas or sections for employee parking. The side location and placement of the parking lot well creates ample times for car parkers to use the exact time and allow for easy turnover rates as it acts a remedy to Identification access difficulties and unfortunate pavement location and other outlined plant material stipulations.
Thursday, October 3, 2019
E-Bulletin Board System Essay Example for Free
E-Bulletin Board System Essay Chapter 3 Methodologies These Chapters provide, the research described the method of the research used and data gathering procedure, instruments and data processing techniques. Also provide the Technical Background, Theoretical and Conceptual Framework that will be tackling in this chapter. A. Technical Background In this study the main propose of our system is to create a reliable Computer Based Record Remittance System. In which we enhance the searching and updating the remittance of the employees of the Columban College specially the former employees that requesting the record of their remittances. The proposed system will use high level languages Hypertext Preprocessor (PHP) for the system programming and for the style will be use Cascading Style Sheet (CSS) and for the records of remittances will be used database (SQL). It can search and update files of the remittances that will serve as the records. The records will be in the database that the administrator can view and can search, add, edit, and update. The proposed system will use the software Microsoft Windows Apache Server MySQL PHP Pearl (WAMP); this software will be needed to run the system and to be able to use it. The theory given in Figure 1. 1 shows that the use of the process of model also tells us that every function within our company contains key elements that define our processes. The inputs that are needed to perform the process and the process define the step taken to create the output, and the outputs will be the product or services created. This theory help us in our proposed system to determine the functions of our inputs which are the records of the remittances that all data will be process in the way that data entries of all files that they want to store in the database. And the output will be the entered data that is now the new record, and it can use now as the original file in the company. C. Conceptual Framework This conceptual framework becomes the central theme, the focus, the main thrust of the study. It visualizes the idea of the proposed system that can access by the administrator. Figure 2. 0 Conceptual Framework The flow of the Figure 2. 0 uses a high level language Hypertext Preprocessor (PHP) for the application programming and therefore the information source (Database, Searching, Adding, Editing, Updating, and Deleting). The data collected provided significant and necessary results and conclusions, and possible solutions to unpredictable problems that may arise. The appropriately selected instruments employed were the questionnaire, and the technique applied was the observation method. Observation This method is vital in gathering facts that will support the study in a way which promotes the validity of the data gathered. This technique was adapted because instances often arise and may not be avoided when certain data is not adequately and credibly secured through the use of questionnaire and except through observation.
Cone Beam Computed Tomography (CBCT) to Assess Bone Density
Cone Beam Computed Tomography (CBCT) to Assess Bone Density INTRODUCTION Implantology has witnessed an explosive growth during the last few years, from a technique practiced on the fringe of acceptability to one embraced by the mainstream dentistry and dental implants have emerged as a widely accepted form of teeth replacement. Implants are bio-acceptable materials with an inherent capacity to osseointegrate into the jaw bone to support a dental prosthesis to restore adequate function and esthetics without affecting adjacent hard and soft tissue structures. The Success of any implant procedure depends on a series of patient related and procedure dependent parameters, which include general health conditions, biocompatibility of the implant material, feature of the implant surface, surgical procedure and the quality and quantity of the local bone1. Careful recording and analysis of clinical and radiological information, interdisciplinary communication and detailed planning play an important role in determining the final successful outcome. Bone density is a key factor to take into account when predicting implant stability2 Clinical studies show greater implant survival in the mandible than in the upper maxilla, due to the bone characteristics. This survival is influenced by bone quality i.e. bone density2 .The bone density is an important determining factor in implant treatment and can be assessed fairly using different imaging techniques3. The quality of bone in the proposed implant site in terms of relative proportion and density of cortical and medullary bone has frequently been assessed by using a grading scheme proposed by Lekholm and Zarb, which is applicable only to cross sectional images. This classification system has been utilized worldwide because it is easy to use without considerable investment. Misch (2008) used computed tomography (CT) to objectively classify bone density into 5 types based on Hounsfield units (HU). This method allows for a precise and objective assessment of bone quality2 Several imaging techniques are currently available for presurgical and postsurgical examination, including devices developed specifically for dental implant imaging. Computerized tomograms are one of the best available radiographs for determining the bone quality. With the advancement of radiographic technology, computed tomography (CT), as well as cone- beam computed tomography (CBCT) are increasingly being considered essential for optimal implant placement , especially in the case of complex reconstructions4 Unlike conventional two-dimensionalà radiographs, techniques like CBCT offer 3-D views of the mouth, face, and jaw from any direction. The cone beam configuration is ideal for the maxillofacial region because the dimensions of the beam allow for a panoramic view, sparing patients the radiation exposure of separate scans of the maxilla and mandible5.The overall advantages of CBCT are in its high resolution, potentially lower radiation dose and reduced cost compared with standa rd Computerized Tomography2 The past two decades have seen continual efforts by manufacturers, researchers and clinicians to improve the success of implant treatment outcomes through evolution in implant designs, materials and clinical procedures6. One such aspect is co-relation of available bone density with primary implant stability. Primary implant stability denotes the stability of a dental implant immediately after placement. Implant stability can be evaluated objectively, noninvasively, and easily by the insertion torque test.7 The insertion torque measurement technique, which records the torque after the implant has been placed, provides information on the local bone quality8. A High initial stability may be an indication for immediate loading with prosthetic reconstruction. A low primary stability following implantation, can cause the implants mobility leading to failure. Bone density and implant stability are important factors for implant osseointegration, and has been widely demonstrated by several au thors3. The insertion torque measurement technique, which records the torque during implant placement, provides information on the local bone quality.1 A number of studies have shown the relationship between bone density based on CT and primary implant stability 9,10. However, there are few studies about the relationship between bone density estimated by CBCT and primary implant stability. The possibility of predicting the primary implant stability and bone quality during the pre-surgical assessment of the implant placement site may produce an implant treatment protocol with higher predictability. The bone density and Implant stability can be evaluated using CBCT and the insertion torque test which records the torque during implant placement and provides information of the local bone quality6, 8. Keeping in mind the aforesaid goals the present study was designed to compare and evaluate the relationship between the bone density estimated by CBCT and the primary implant stability of t he dental implants by measurements of the insertion torque and to determine their correlation. MATERIALS AND METHODS Twenty out- patients with missing single/ multiple teeth who visited the Department of Oral Maxillofacial Surgery, Dayananda Sagar College of Dental Sciences, Bangalore and who were suitable for implant rehabilitation were considered and taken up for the study. Patients with uncontrolled systemic/ psychiatric illness, previous history of undergoing radiotherapy or chemotherapy, pregnant patients, cases of post implant removal and implants placed in sinus lift and immediate extraction sites were excluded from the study. pre-operative assessment: Patients selected based upon the above criteria underwent a thorough clinical examination, and the details were recorded using custom-made case proforma. A written informed consent was obtained from all patients and a standardized pre-surgical and surgical protocol was followed for all the patients. Pre-operative bone density of implant sites were evaluated using cone beam computerized tomographic scans. Bone density measurements were derived using 3DiagnoSys version 4.1 Software (3DIEMME Bio imaging Technologies). 3Diagnosysà ® is a diagnostic imaging, analyses and 3D simulation software, tailored for the Clinician. 3Diagnosysà ® software helps to interact with the 3D-model of the Patient, which is obtained by importing TC/CBCT/RM images in DICOM format, in a simple and intuitive way. The tools included in this software are not bound to morphological reconstructions but are also able to extract from the DICOM data the densitometric values for a bone funct ional evaluation.)Pre-operative evaluation of bone height and bone width was done using Cone Beam Computed Tomographic scan and appropriate implants were selected to be placed. The bone height and width measurements were achieved using the ââ¬Å"Carestream Dental Imaging Software v6.13.3.3 CS imaging softwareâ⬠(Fov-15x9cm)â⬠.All CBCT scans were obtained using the ââ¬Å"KODAK 9500machineâ⬠(10ma 90 Kvp, 200 micron resolution, 10.9sec exposure, 605mgy per cm2). STATISTICAL ANALYSIS The statistical analyses were performed using SPSS version 16.0 software (SPSS Inc., Tokyo,Japan). Spearmanââ¬â¢s correlation coefficient (rs) was calculated to evaluate the correlation among density values and insertion torques. A value of P RESULTS The density value ranged from 209.91 to 667.13Hu. The mean density value and insertion torque of all implants were 464.69 + 135.74 Hu and 49.0 + 8.20 respectively. There was highly significant correlation between bone density and insertion torque (rs 0.89, P DISCUSSION Over the last decade, there has been significant changes in reconstruction with dental implants. Rather than merely focusing on the tooth or teeth to be replaced, todayââ¬â¢s implant practitioner considers a broad and complex set of interwoven factors before formulating an implant treatment plan4. Proper treatment planning comprises of pre ââ¬â operative depiction and quantification of accurate bone height and contour which can be established by radiographic examination.11 The success of dental implants relies heavily on both the quality and the quantity of available bone for implant placement3. Studies have shown higher failure rates for implants placed in bone of poor quality and quantity.3 Bone density is a key factor to take into account when predicting implant stability2 Clinical studies show greater implant survival in the mandible than in the upper maxilla, due to the bone characteristics. This survival is influenced by bone quality i.e. bone density2 The bone density is an important determining factor in implant treatment and can be assessed fairly using different imaging techniques5. The quality of bone in the proposed implant site in terms of relative proportion and density of cortical and medullary bone has frequently been assessed by using a grading scheme proposed by Lekholm and Zarb, which is applicable only to cross sectional images. This classification system has been utilized worldwide because it is easy to use without considerable investment. Misch (2008) used computed tomography (CT) to objectively classify bone density into 5 types based on Hounsfield units (HU). This method allows for a precise and objective assessment of bone quality3 Several imaging techniques are currently available for presurgical and postsurgical examination, including devices developed specifically for dental implant imaging.12 They are used to visualize the internal anatomy of the jaws in 3-dimensional perspectives, including the proximity ofà nasal fossae, neurovascular bundles, pneumatization of the maxillae, soft tissue morphology and bone quality. Computerized tomograms are one of the best available radiographs for determining the bone quality. Periapical and panoramic radiographs are the least viable options as the subtle changes between the different bone types canââ¬â¢t be quantified using them, also the lateral cortical plates tend to obscure the trabecular density . With the advancement of radiographic technology, computed tomography (CT), as well as cone- beam computed tomography (CBCT) are increasingly being considered essential for optimal implant placement , especially in the case of complex reconstructions 13. Unlike conve ntional two-dimensional radiographs, techniques like CBCT offer 3-D views of the mouth, face, and jaw from any direction.1 The cone beam configuration is ideal for the maxillofacial region because the dimensions of the beam allow for a panoramic view, sparing patients the radiation exposure of separate scans of the maxilla and mandible14. The overall advantages of CBCT are in its high resolution, potentially lower radiation dose and reduced cost compared with standard Computerized Tomography15 The past two decades have seen continual efforts by manufacturers, researchers and clinicians to improve the success of implant treatment outcomes through evolution in implant designs, materials and clinical procedures2. One such aspect is co-relation of available bone density with primary implant stability. Primary implant stability refers to the stability of a dental implant immediately after implantation. Implant stability can be evaluated objectively, noninvasively, and easily by the insertion torque test.16 The insertion torque measurement technique, which records the torque after the implant has been placed, provides information on the local bone quality. High initial stabilization may be an indication for immediate loading with prosthetic reconstruction. If primary stability is not high enough following implantation, the implants mobility is high and can cause failure. A number of devices and techniques have been developed to assess implant stability, including cutting torque resistance analysis, the reverse torque test, the insertion torque test, the mobility measurement test, and resonance frequency (RF) analysis2. Implant stability can be evaluated objectively, noninvasively, and easily by the insertion torque test and RF analysis.17 The insertion torque measurement technique, which records the torque during implant placement, provides information on the local bone quality1. A number of studies have shown the relationship between bone density based on CT and primary implant stability .9,10However, there are few studies about the relationship between bone density estimated by CBCT and primary implant stability.In a study conducted by Isoda k et al; The bone quality evaluated by specific CBCT showed a high correlation with the primary stability of the implants.8 CBCT is one of the significant imaging modalities that can be used to assess the relat ionship between primary implant stability and bone density which can further give an insight into the prognosis of the implant treatment. Implant stability can be evaluated objectively, non-invasively and easily by using the insertion torque test which records the torque during implant placement and provides information of the local bone quality 1. Keeping in mind the aforesaid goals the present study was designed to compare and evaluate the relationship between the bone density estimated by CBCT and the primary implant stability of the dental implants by measurements of the insertion torque. It also aims to determine the correlation between bone density and primary stability of implant by insertion torque value. In all cases Implants were placed under local anesthesia. Different implant systems were used and all were root form implants. Surgical preparation and isolation of surgical field was accomplished according to standard operative protocols. A Crestal incision was placed and Mucoperiosteal flap was reflected and alveolar bone was exposed, and the implant placement site was identified by the marking made with the aid of the surgical probe. Osteotomy site preparation was done with a Reduction gear hand piece (1:16/64) with an external Irrigation attached to the handpiece. Implant osteotomy was performed using standard sequential drill bits as per the dimensions of the implant. The osteotomy was proceeded till the desired depth as per the selected implants. The Implant was driven into the osteotomy site using the manual torque wrench till the final depth was reached. All Implants placed were of tapered design and their lengths ranging from 8 to 16 mm and diameters from 3-5 mm. After placi ng the implant, the implant stability was measured manually using the insertion torque test by a torque wrench with calibrations .The insertion torque reading was measured and recorded at the maximum torque resistance achieved. The cover screw over the implant was then placed and Flap closure was done. Post-operative OPG and IOPA was taken. Routine Antibiotics and anti-inflammatory drugs were prescribed along with oral hygiene maintenance instructions. Patients were recalled for regular follow ups. Permanent prosthesis was given after 3 months. SUMMARY CONCLUSION The study assessed the bone quality with density values obtained by cone beam computed tomography (CBCT) pre-operatively and determined their correlation with the insertion torque values recorded during the Implant placement procedure.From the observations and results obtained ,We can conclude that, the present study demonstrates the relationship between the bone density values derived from Cone Beam computerized tomography (Hu), located in the maxilla and mandible , and bone quality according to the Lekholm Zarb classification. The primary implant stability measured with the insertion torque test (ITV) depends on bone density values, bone quality and implant location. Implants Placed in location with higher bone density have more stability, and we can probably predict the implant insertion torque based on the bone density values (Hu) and the implant location. Finally, with higher bone density values (Hu) and higher primary implant stability measured in ITV values; Hounsfield units can be used as a diagnostic parameter to predict possible implant stability. The results of our study indicate that CBCT can be used to assess the bone quality. Also attaining a good insertion torque and thereby enhancing the implant stability aids successful osseointegration and prosthetic rehabilitation. Hence CBCT can be used as a predictor diagnostic tool for implant success. We suggest that a larger number of patients with a larger follow up might help a conclusive determining factor that pre-operative CBCT is a predictor for primary implant stability.
Wednesday, October 2, 2019
War on Drugs is a Domestic Problem Essay examples -- essays research p
WAR ON DRUGS IS A DOMESTIC PROBLEM Ã Ã Ã Ã Ã The new policy that the government has unfolded on the War on Drugs, has pointed the finger of responsibility toward stopping terrorism by stopping the individual drug users. Terrorism affects the entire world, and the United States has assumed a position at the spearhead to confront it. There is no way to actually stop terrorism, but one way to financially divert the problem is to stop the money from flowing to the organizations. Ã Ã Ã Ã Ã The War on Drugs has been taken to a new level since the attack on the United States in September. Just two days before the attack in New York and Washington D.C. a shipment, being distributed by the Columbians, of Afghan heroin, reported to be 53 kilograms, was seized in New York. (Denny) This event demonstrates how the terrorist and the narcotics trade are linked together. Without the funding of drug trafficking, many terrorist organizations would not be able to continue operations at the current levels. Ã Ã Ã Ã Ã Drug traffickers share common traits along with the terrorists of the world. A drug trafficker does not have a general regard for human life. The only thing that matters to the trafficker is the money that is made from the illegal sale of the product. Whether the money comes from a twelve year old in anyone of the main cities in the United States or from a terrorist organization does not matter to a trafficker. This di...
Tuesday, October 1, 2019
The Theme of Death in Haydn Middletons The Lie of the Land :: Middleton Lie of the Land Essays
The Theme of Death in Haydn Middleton's The Lie of the Land Haydn Middleton's The Lie of the Land is a complex book filled with many themes. One of them, which I focused on, is the theme of death. Death seems to be shown as a means to an end. In the beginning, David sees death as an inevitable, horrible event that he must face up to all too soon. "I'm going to die" (p. 16) David states to Rachel during his first visit to the Samaritan Center. "I know I've got to die, Rachel but I'm a coward" (p. 18). David's death won't be one of the ordinary. David is one of the chosen. He is one of the sons of the sky. He is tormented by the woman's voice, the one who chose him, who is always overshadowing him. The woman, possibly the angel of death, has an elaborate plan laid out for David. It began when he was first conceived and will continue on until the day that he dies and beyound. "In her vindictiveness she would call these new sons of the sky westward. And, at the gateway to Albion, she would make them perform, in that brightest light that sits forever upon the darkness, the dance of death..." (p. 85). The island of Albion seems to be referred to as hell. David speaks of being in contact with "...the keeper of the gateway to hell" (p. 18). The island is believed to be a "...rendezvous for the souls of the dead" (p. 79). When the time comes the woman will call to the sons of the sky and take David to the island of the dead. David didn't fully understand his fate until it was explained to him by his stepfather, Emrys. Later in life, when David is married and a son of his own, the power of the woman took over his mind and body. She willed him to committ one of the worst crimes possible. He took the life of another human being. And in the process he lost his own life as well. Not literally, but he lost his family and his soul. He had nothing. "I am the son of the sky, he thought. And after so many years, he knew what that meant. He knew that he would dance before his time. And he knew, too, glancing down at his child, that there would be more than one end" (p. The Theme of Death in Haydn Middleton's The Lie of the Land :: Middleton Lie of the Land Essays The Theme of Death in Haydn Middleton's The Lie of the Land Haydn Middleton's The Lie of the Land is a complex book filled with many themes. One of them, which I focused on, is the theme of death. Death seems to be shown as a means to an end. In the beginning, David sees death as an inevitable, horrible event that he must face up to all too soon. "I'm going to die" (p. 16) David states to Rachel during his first visit to the Samaritan Center. "I know I've got to die, Rachel but I'm a coward" (p. 18). David's death won't be one of the ordinary. David is one of the chosen. He is one of the sons of the sky. He is tormented by the woman's voice, the one who chose him, who is always overshadowing him. The woman, possibly the angel of death, has an elaborate plan laid out for David. It began when he was first conceived and will continue on until the day that he dies and beyound. "In her vindictiveness she would call these new sons of the sky westward. And, at the gateway to Albion, she would make them perform, in that brightest light that sits forever upon the darkness, the dance of death..." (p. 85). The island of Albion seems to be referred to as hell. David speaks of being in contact with "...the keeper of the gateway to hell" (p. 18). The island is believed to be a "...rendezvous for the souls of the dead" (p. 79). When the time comes the woman will call to the sons of the sky and take David to the island of the dead. David didn't fully understand his fate until it was explained to him by his stepfather, Emrys. Later in life, when David is married and a son of his own, the power of the woman took over his mind and body. She willed him to committ one of the worst crimes possible. He took the life of another human being. And in the process he lost his own life as well. Not literally, but he lost his family and his soul. He had nothing. "I am the son of the sky, he thought. And after so many years, he knew what that meant. He knew that he would dance before his time. And he knew, too, glancing down at his child, that there would be more than one end" (p.
Measuring academic proficiency under the NCLB.
The No Child Left Behind (NCLB) Act was designed to close the achievement gap between high and low performing children, especially the achievement gap between minority and non-minority students and between disadvantaged children and their more advantaged peers (NCLB, 2001). The key components of the act are the adequate yearly programs (AYP), and the annual measurable objectives (AMO). The AYP is the working principle of the act and it is seen as the mechanism for which all schools and all students meet the same academic standards in reading and mathematics by school year 2013-2014. The AMO indicates the performance of the school in terms of proficiency in reading and mathematics tests. Moreover, the law identifies student subgroups like economically disadvantaged students, students form major racial and ethnic groups, students with disabilities and students with limited English proficiency. The law also specifically requires that 95% of the total number of students in a school and 95% of each subgroup to take the reading and math standardized tests, while the state is tasked to determine its own AMO targets and the minimum number of students in each subgroup who are required to meet or surpass the AMO targets (NCLB, 2001). The AYP requirements apply to Title 1 and non-title 1 school that receive federal funding. Schools that do not reach AYP for two or more years will be labeled as in need of improvement and are sanctioned. The NCLB employs a conjunctive accountability system wherein each subgroup of students are required to reach the minimum levels of proficiency in math and reading regardless of their previous proficiency levels, thus within 12 years, all students should reach 100% proficiency. NCLB is based on the idea that high expectations for achievement would result to higher actual achievement levels. By requiring each school to reach a uniform level of proficiencyà would mean that in a given period, all schools and all students would have mastered the same skills and learned the same knowledge in reading and mathematics. The NCLB measures progress through a single mean proficiency score across levels and subgroup.à However, this frame of mind does not consider the diversity of American students and their backgrounds. For example, requiring each subgroup to meet the minimum mean proficiency score would ensure that the school would not reach the AYP. Using a single mean proficiency score to measure performance is not a true measure of school improvement nor student performance. Although, NCLB have positive visions, its method of attaining its objectives undermines what it is supposed to do. The law treats each school and each student as a single and uniform entity when our society is composed of different races and backgrounds, not even taking into account the difference between the rich and the poor. Even if the law identified the subgroup of students, it still however assess each group in terms of the single mean proficiency score which is the same as implementing a one size fits all policy. The problem with NCLB is that it asks schools to be assessed against a single mean proficiency score, wherein if a school fails to reach this score, would indicate that the school is not performing as it should be in accordance with federal and state rules. The use of a single mean proficiency score says that each school is treated as equals, however the reality is differences in each school is present. For example, different districts cater to different students and since education have been the purview of the state; they have also different standards on accountability and accreditation. The schools seek to attain the level of performance required by the state and in cases where measures of school performance differ from the NCLB would say that schools are making progress in the state level but is not up to standard in the national level. Students also would be burdened by being pitted against a single score that may or may not be realistically attainable, and if they fail to reach the mark they would have caused the failure of the entire school. Another problem with the NCLB is that by identifying subgroup of students and requiring them to achieve the mean proficiency score puts them in a bind. The subgroups identified by the law in some cases could be an unnecessary repetition of the groups, for example most Blacks and Latinos are economically disadvantaged, and that most of these groups also have lower mean proficiency scores. Thus if a school is composed of many poor students, of different racial groups, of students with limited English proficiency, then this school will surely not reach that mean proficiency score. The NCLB is not friendly to racial groups, economically disadvantaged children, children with disabilities and children with limited English proficiency. It is common knowledge and even supported by statistics that those who are identified as economically disadvantaged are those who belong to a minority racial group. In which case they will be asked to reach the same proficiency score twice, then they will be labeled as under performing and the school as needing improvement. It will compromise what the students have accomplished in a school year, because failing to reach the mark is not equal to no improvement or no learning. As for the parents, they would probably think that NCLB is good for their children as it ensures equality between groups in terms of academic achievement. However, if their state certifies that their children are performing to expectations like in Virginia and California, but the federal government says otherwise would saw confusion and distraught among parents. Schools and districts complain that using a single mean proficiency score to measure performance is not realistic and appropriate. It does not take into consideration that high-poverty schools have students with less academic preparation than those with low-poverty schools. Moreover, by using a system of conjunctive accountability dooms schools from reaching AYP. The short term effects of NCLB on low-income students and of color is that thy will b subjected to more requirements in school or additional interventions that would enable them to reach the desired improvement of scores as well as being pressured to make that mark. The long-term effect is that when they fail to reach AYP and cause the school to lose out on the AYP race, then they will be blamed for it and probably will be faced with angry members of the community. When schools still fail to make the mark and is identified as needs improvement and probably would be given less funding the more the low-income and racial groups become more disadvantaged, instead of closing the academic achievement gap, the NCLB does not even consider what academic achievement is. I think that NCLB was born out of the sincere desire to make sure that our students have the same level of academic proficiency even for math and English only. Whoever drafted the bill however did not have a clear understanding of achievement, intelligence and environmental factors that are part and parcel of learning and education. It is also funny to think that as diverse a population as we have we want to be pitted against a single score when what is more important than the grade or score is actual learning and the evidence of improvement across the years. Thus, as a law that seeks to close the achievement gap between groups of students, the NCLB divides and places the minority groups in a more difficult situation and at a more disadvantaged position. Ã
Subscribe to:
Posts (Atom)